热门站点| 世界资料网 | 专利资料网 | 世界资料网论坛
收藏本站| 设为首页| 首页

GB/T 22694-2008 家用和类似用途不带过电流保护的固定式剩余电流保护插座(FRCS)

作者:标准资料网 时间:2024-04-28 02:40:59  浏览:8160   来源:标准资料网
下载地址: 点击此处下载
基本信息
标准名称:家用和类似用途不带过电流保护的固定式剩余电流保护插座(FRCS)
英文名称:Fixed residual current protective socket-outlets without integral overcurrent protection for household and similar uses(FRCS)
中标分类: 电工 >> 低压电器 >> 低压电器综合
ICS分类: 电气工程 >> 电工器件 >> 插头、插座、联接器
发布部门:中华人民共和国国家质量监督检验检疫总局 中国国家标准化管理委员会
发布日期:2008-12-31
实施日期:2009-11-01
首发日期:2008-12-31
作废日期:
主管部门:中国电器工业协会
提出单位:中国电器工业协会
归口单位:全国电器附件标准化技术委员会
起草单位:浙江正泰建筑电器有限公司、杭州鸿雁电器有限公司、苏州路美思电气有限公司等
起草人:陈玉、单朝兰、余窻、孔军、刘新春、陈景正、祝振卿、李立新、罗怀平、陆振友、曹文渠
出版社:中国标准出版社
出版日期:2009-11-01
页数:40页
计划单号:20072188-T-604
适用范围

本标准规定了家用和类似用途的固定式剩余电流保护插座的要求。本标准适用于不带过电流保护,交流50Hz或60Hz,对地额定电压不超过交流250V,额定电流不超过16A的单相电路的FRCS。

前言

没有内容

目录

前言Ⅲ 1 范围1 2 规范性引用文件1 3 术语和定义2 4 分类6 5 FRCS的特性7 6 标志和其他产品资料9 7 使用和安装的标准工作条件10 8 结构和操作要求10 9 试验16 附录A (规范性附录) 验证符合本标准的试验程序和提交的试品数量26 附录B (规范性附录) 常规试验30 附录C (规范性附录) 确定电气间隙和爬电距离31 附录D (规范性附录) 验证FRCS符合电磁兼容(EMC)技术要求的试验、补充试验程序和试验试 品数量一览表33

引用标准

下列文件中的条款通过本标准的引用而成为本标准的条款。凡是注日期的引用文件,其随后所有的修改单(不包括勘误的内容)或修订版均不适用于本标准,然而,鼓励根据本标准达成协议的各方研究是否可使用这些文件的最新版本。凡是不注日期的引用文件,其最新版本适用于本标准。
GB1002 家用和类似用途单相插头插座型式、基本参数和尺寸
GB2099.1—2008 家用和类似用途插头插座 第1部分:通用要求(IEC60884-1:2006,MOD)
GB/T4207—2003 固体绝缘材料在潮湿条件下相比电痕化指数和耐电痕化指数的测定方法(IEC60112:1979,IDT)
GB4208—2008 外壳防护等级(IP代码)(IDTIEC60529:2001)
GB/T5169.10—2006 电工电子产品着火危险试验 第10部分:灼热丝/热丝基本试验方法 灼热丝装置和通用试验方法(IEC60695-2-1-10:2000,IDT)
GB16916.1—2003 家用和类似用途的不带过电流保护的剩余电流动作断路器(RCCB) 第1部分:一般规则(IEC61008-1:1996,MOD)
GB/T16935.3—2005 低压系统内设备的绝缘配合 第3部分 利用涂层、罐装和模压进行防污保护(IEC60664-3:2003,IDT)
GB18499—2008 家用和类似用途的剩余电流动作保护器(RCD)电磁兼容性(IEC61543:1995,IDT)
GB20044—2005 电气附件 家用和类似用途的不带过电流保护的移动式剩余电流装置(PRCD)(IEC61540:1997,MOD)

所属分类: 电工 低压电器 低压电器综合 电气工程 电工器件 插头 插座 联接器
下载地址: 点击此处下载
MIL-HDBK-336-2, MILITARY HANDBOOK SURVIVABILITY, AIRCRAFT, NONNUCLEAR, GENERAL CRITERIA (VOLUME 2) (21 SEP 1983)., This is the first volume in a four-volume design handbook for nonnuclear survivability of military aircraft. Each volume is structured to be used in conjunction with the other three volumes, as needed, in the design process. This volume contains specific subsystem design concepts, procedures, and other pertinent information. The information and design guidance contained in this volume is arranged in a manner to enhance its use in the conceptual design process, system research, design, test, and evaluation (RDT&E) programs, and existing aircraft modification programs where nonnuclear survivability features are required. Specific information pertinent to each subsystem is contained therein. This volume is arranged to permit the designer or analyst to select the specific area or subject of concern in the design or modification of an aircraft system and find the candidate design methods that may be considered for use. Table 1-1 is a matrix of the general survivability enhancement methods and the subsystems associated with military aircraft. The general applicability of the listed methods, for each subsystem, is indicated by a dot in the matrix. This serves as a preliminary check list for the user to ensure that all potential candidate survivability enhancement methods are considered. The use of this chart is an essential step in the process of selecting the most effective combination of survival enhancement features for the given aircraft design concept. APPLICATION: The data contained in this design handbook have been arranged to support the development of both fixed and rotary wing military aircraft. Each has unique mission and performance characteristics that require specialized attention and design solutions. The subystem design categories have been established with these considerations in mind. For example, the power train and rotor blade subsystems deal primarily with military helicopter applications, while the launch/recovery systems deal with those subsystem elements for both fixed and rotary wing aircraft landing gear systems and for those systems related to the assisted takeoff (launching) and deceleration (recovery) methods most used by the Air Force and Navy fixed-wing aircraft.
基本信息
标准名称:钢丝型弹性环箍
中标分类: 车辆 >> 车辆通用零部件 >> 螺塞、管件
替代情况:JB 3614-84;转化为QC/T 621-1999
发布日期:
实施日期:1990-10-01
首发日期:
作废日期:
出版日期:
页数:5页
适用范围

没有内容

前言

没有内容

目录

没有内容

引用标准

没有内容

所属分类: 车辆 车辆通用零部件 螺塞 管件

版权声明:所有资料均为作者提供或网友推荐收集整理而来,仅供爱好者学习和研究使用,版权归原作者所有。
如本站内容有侵犯您的合法权益,请和我们取得联系,我们将立即改正或删除。
京ICP备14017250号-1