热门站点| 世界资料网 | 专利资料网 | 世界资料网论坛
收藏本站| 设为首页| 首页

YS/T 730-2010 建筑用铝合金木纹型材

作者:标准资料网 时间:2024-04-29 01:48:30  浏览:8909   来源:标准资料网
下载地址: 点击此处下载
基本信息
标准名称:建筑用铝合金木纹型材
英文名称:Wood grain profiles of aluminium alloys used for architecture
中标分类: 冶金 >> 有色金属及其合金产品 >> 轻金属及其合金
ICS分类: 冶金 >> 有色金属产品 >> 铝产品
发布部门:中华人民共和国工业和信息化部
发布日期:2010-11-22
实施日期:2011-03-01
首发日期:
作废日期:
主管部门:全国有色金属标准化技术委员会(SAC/TC 243)
提出单位:全国有色金属标准化技术委员
归口单位:全国有色金属标准化技术委员会(SAC/TC 243)
起草单位:广东新合铝业有限公司、广东广铝集团有限公司
起草人:曹贵水、杨伏丝、焦斌、吴军、陈远珍、陈慧、谢志军、王俊曦、周春荣
出版社:中国标准出版社
出版日期:2011-03-01
页数:20页【彩图】
适用范围

本标准规定了建筑用铝合金木纹型材(以下简称木纹型材)的要求、试验方法、检验规则、包装、标志、运输、贮存及订货单(或合同)内容。
本标准适用于粉末喷涂型材表面经热转印或二次喷涂处理制成的、表面具有木纹图案的铝合金型材。

前言

没有内容

目录

没有内容

引用标准

GB178 水泥强度试验用标准砂
GB/T1732 漆膜耐冲击性测定法
GB/T1740 漆膜耐湿热测定法
GB/T1766 色漆和清漆 涂层老化的评级方法
GB/T1865—1997 色漆和清漆 人工气候老化和人工辐射暴露(滤过的氙弧辐射)
GB/T3199 铝及铝合金加工产品包装、标志、运输、贮存
GB/T4957 非磁性基体金属上非导电覆盖 覆盖层厚度测量 涡流法
GB5237.1 铝合金建筑型材 第1部分:基材
GB/T6461 金属基体上金属和其他无机覆盖层经腐蚀试验后的试样和试件的评级
GB/T6682—2008 分析实验室用水规格和试验方法
GB/T6739 涂层硬度铅笔测定法
GB/T8013.3 铝及铝合金阳极氧化膜与有机聚合物膜 第3部分:有机聚合物喷涂膜
GB/T9275 色漆和清漆 巴克霍尔玆压痕试验
GB/T9286 色漆和清漆 漆膜的划格试验
GB/T9754 色漆和清漆 不含金属颜料的色漆漆膜的20°、60°和85°镜面光泽的测定
GB/T9761 色漆和清漆 色漆的目视比色
GB/T10125 人造气氛腐蚀试验 盐雾试验
GB/T11186.2 涂膜颜色的测量方法 第二部分 颜色测定
GB/T11186.3 涂膜颜色的测量方法 第三部分 色差计算
JC/T480 建筑生石灰粉
YS/T242 表盘及装饰用铝及铝合金板

所属分类: 冶金 有色金属及其合金产品 轻金属及其合金 冶金 有色金属产品 铝产品
下载地址: 点击此处下载
【英文标准名称】:IndustrialcommunicationsubsystembasedonISO11898(CAN)forcontroller-deviceinterfaces.CANopen
【原文标准名称】:基于ISO11898(CAN)控制器装置接口的工业通信子系统.CANopen
【标准号】:BSEN50325-4-2002
【标准状态】:现行
【国别】:英国
【发布日期】:2003-02-03
【实施或试行日期】:2003-02-03
【发布单位】:英国标准学会(GB-BSI)
【起草单位】:BSI
【标准类型】:()
【标准水平】:()
【中文主题词】:自动化;总线系统;CAN;通信程序;通信系统;控制装置;控制系统;控制器局域网络;数据交换;数据链层;数据处理;数据传输;定义(术语);数字信号;电气工程;电磁兼容性(EMC);现场总线;工业;信息交换;接口电路;接口;接口(数据处理);限位开关;局域网;电动机起动器;网络接口;数值控制;物理层;产品信息;接近开关;继电器;监督(认可)
【英文主题词】:Automation;Bussystems;CAN;Communicationprocedures;Communicationsystems;Controldevices;Controlsystems;ControllerAreaNetwork;Dataexchange;Datalinklayers;Dataprocessing;Datatransmission;Definitions;Digitalsignals;Electricalengineering;EMC;Fieldbus;Industries;Informationinterchange;Interfacecircuits;Interfaces;Interfaces(dataprocessing);Limitswitches;Localareanetworks;Motorstarters;Networkinterfaces;Numericalcontrol;Physicallayers;Productinformation;Proximityswitches;Relays;Surveillance(approval)
【摘要】:EN50325-4specifiesthefollowingparticularrequirementsforCANopen:·requirementsforinterfacesbetweenprogrammablecontrollersanddeviceswithinput/outputcapabilities;·normalserviceconditionsfordevices;·constructionalandperformancerequirements.
【中国标准分类号】:M11
【国际标准分类号】:29_130_20;35_200
【页数】:118P.;A4
【正文语种】:英语


Product Code:SAE J826
Title:Devices for Use in Defining and Measuring Vehicle Seating Accommodation
Issuing Committee:Human Accom And Design Devices Stds Comm
Scope:The devices of this SAE Standard provide the means by which passenger compartment dimensions can be obtained using a deflected seat rather than a free seat contour as a reference for defining seating space. All definitions and dimensions used in conjunction with this document are described in SAE J1100. These devices are intended only to apply to the driver side or center occupant seating spaces and are not to be construed as instruments which measure or indicate occupant capabilities or comfort. This document covers only one H-point machine installed on a seat during each test. Certified H-point templates and machines can be purchased from:SAE International400 Commonwealth DriveWarrendale, PA 15096-0001Specific procedures are included in Appendix A for seat measurements in short- and long-coupled vehicles and in Appendix B for measurement of the driver seat cushion angle. Specifications and a calibration inspection procedure for the H-point machine are given in Appendix C. Additional considerations are necessary when a Head Restraint Measuring Device (HRMD) is mounted to an H-point machine (Appendix D).

版权声明:所有资料均为作者提供或网友推荐收集整理而来,仅供爱好者学习和研究使用,版权归原作者所有。
如本站内容有侵犯您的合法权益,请和我们取得联系,我们将立即改正或删除。
京ICP备14017250号-1